JXB Ford F150 2004+ Center Support Bearing Spacer Kit

Description

Applications and fitment

Confirm the model, transmission, driveshaft and any exclusions listed for your application.

Ford F150 2004+ Center Support Bearing Spacer Kit

2004+ Ford F150

Manufacturer application and installation reference

Manufacturer details

SP001A0 – Up to 4” Rear Lift – For use with JXB driveshaft carriers
2 female 2.5 mm bottom starter spacers
2 male 2.5 mm top finishing spacers
2 male/female 2.5 mm spacers
2 male/female 5 mm spacers
2 male/female 10 mm spacers
4 male/female 20 mm spacers
2 shorter 70 mm bolts
2 longer 100 mm bolts
2 bolt sleeves that allow installation with shoulder bolts that come with JXB driveshaft carriers
SP001A1 – 4-7” Rear Lift – For use with JXB driveshaft carriers
8 male/female 20 mm spacers
2 shorter 130 mm bolts
2 longer 160 mm bolts
Please note the SP001A0 and SP001A1 products can be purchased together with the JXB driveshaft carrier upgrade here using the dropdown box to add them.
SP001A2 – Up to 4” Rear Lift – For use with OEM center support bearings
2 shorter 50 mm bolts
2 longer 80 mm bolts
SP001A3 – 4-7” Rear Lift – For use with OEM center support bearings
2 shorter 110 mm bolts
2 longer 140 mm bolts

The exact steps to access the carrier will vary slightly by model, but the removal and installation of the new carrier are the same. The basic steps are:
Remove any braces or splash shields preventing exhaust and heat shield removal
Remove or lower exhaust in area of center support bearing if needed for access
Remove heat shielding covering center support bearing
If installing new carrier, Cut off OEM carrier and remove rubber support material with razorblade, leaving base layer of molded-on rubber intact on the bearing
Clamp new carrier around OEM bearing
Place CSB spacers on top of the carrier mounting tabs

2004+ Ford F150

SP001A0 – Up to 4” rear lift – for JXB driveshaft carriersSP001A1 – 4-7” rear lift – for JXB driveshaft carriersSP001A2 – Up to 4” Rear Lift – for OEM center support bearingsSP001A3 – 4-7” rear lift – for OEM center support bearings

Off-road use only.

Ships directly from JXB. Shipping options depend on the items and destination. Expedited shipping requires a confirmed quote. Contact Echo for a shipping quote.