JXB Pre-Sharpened Ice Racing Studs (Bolts) - 25 pack
JXB Performance
$32.99
Review the product specifications and installation requirements.
Compatibility
Review the manufacturer applications, exclusions and installation notes in the product description. Confirm the correct configuration for your vehicle.
Vehicle fitment
Technical support
Supplier fulfillment
Check compatibility (optional)
You can add this part to your cart without selecting a vehicle. Check the product description for applications and installation requirements.
Review your vehicle
Select your model year, make, model and engine.
Matches use the listed vehicle series and model years. Product descriptions explain any exclusions and installation requirements.
These bolts are meant for use with many ice racing organizations in their “spec stud” class. Specs:
M8x1.25 bolts (metric equivalent to 5/16”)
1.25” long
Class 10.9 (metric equivalent to grade 8)
Each bolt comes with a custom nylon insert locknut with a wide flange for the outside of the tire.
No washers required
Torque Specs
Hold the bolt, torque the nut
Do not exceed 20 Nm
Do not use an impact gun or you will 100% strip the head of the nut
How To Make A Studded Tire
Figure out how many studs you’re allowed according to your organization’s rules
Pick out a tire with well-defined tread blocks; it’ll make creating a pattern easier
Drill 3/16” holes from outside in for each stud
Put a dab of urethane windshield adhesive on the end of a stud and use a drill/impact to push it through
Put a small bead of adhesive all around the outside of the bolt where it comes out of the tire
Add washer and tighten nut. The washer should squish the tread pretty well on the outside; it should feel pretty darn tight
Tire Selection
There are a lot of factors to consider when choosing a tire for ice racing. We believe the ideal tire has a stiff sidewall, has minimal tread to not eat up bolt length, and isn’t dry rotting. Something less than 5 years old is ideal. Stay away from racing slicks and non-DOT tires, as they will crack at cold temperatures. Ask us how we know…
Ships through JXB. Shipping is quoted for the items and delivery address before payment. Check the listed application and installation requirements before ordering.
OVERVIEW
These bolts are meant for use with many ice racing organizations in their "spec stud” class. Specs:
M8x1.25 bolts (metric equivalent to 5/16”)
1.25” long
Class 10.9 (metric equivalent to grade 8)
Each bolt comes with a custom nylon insert locknut with a wide flange for the outside of the tire.
No washers required
TORQUE SPECS
Hold the bolt, torque the nut
Do not exceed 20 Nm
Do not use an impact gun or you will 100% strip the head of the nut
HOW TO MAKE A STUDDED TIRE
Figure out how many studs you’re allowed according to your organization’s rules
Pick out a tire with well-defined tread blocks; it’ll make creating a pattern easier
Drill 3/16” holes from outside in for each stud
Put a dab of urethane windshield adhesive on the end of a stud and use a drill/impact to push it through
Put a small bead of adhesive all around the outside of the bolt where it comes out of the tire
Add washer and tighten nut. The washer should squish the tread pretty well on the outside; it should feel pretty darn tight
TIRE SELECTION
There are a lot of factors to consider when choosing a tire for ice racing. We believe the ideal tire has a stiff sidewall, has minimal tread to not eat up bolt length, and isn’t dry rotting. Something less than 5 years old is ideal. Stay away from racing slicks and non-DOT tires, as they will crack at cold temperatures. Ask us how we know…
Reviews
There are no reviews yet.