ECHO BUILD IN PROGRESS Our new Euro-performance storefront and catalog are under active construction.
Echo build in progress Our new storefront and catalog are under active construction.
JHM Lightweight Crank Pulley for B7-RS4 w 4.2L (32v) V8

JHM Lightweight Crank Pulley for B7-RS4 w 4.2L (32v) V8

Manufacturer JHM Motorsports View brand catalog Catalog SKUJHM-B7RS4LWCP
FITMENT VERIFICATION REQUIRED

Echo can verify the application before you order.

Ask for a fitment check

$299.95

Fitment Verification Required
Need a fitment check?

Send the exact vehicle configuration. This creates a manual review request; it does not claim the part fits.

Available to add; shipping is quoted before payment.

Shipping is confirmed before payment.

Add the part now, then request shipping from your cart. Echo will confirm the supplier, freight, insurance, and final delivered cost.

Request Shipping Quote

THE ECHO PARTS DESK Planning a complete system?

We can confirm the application, supporting parts, availability, price, and shipping before you order.

Ask the Parts Desk
SKU: JHM-B7RS4LWCP Categories: , Brand:

Description

PROUDLY MADE IN THE U.S.A

Introducing the JHM 4.2L FSI V8 Lightweight Crank Pulley for the B7-RS4!!!

Free up power with our NEW Lightweight Crank Pulley which is over 5.5 pounds lighter than stock!

Click to enlarge picture

Audi RS4 Lightweight Crank Pulley

Click to enlarge picture

Audi RS4 Lightweight Crank Pulley

ABOUT THE PRODUCT:

Reducing the rotating mass of parts in or attached to the motor frees up horsepower and increases the throttle response of the motor. This modification will not provide a drastic power increase but it is a key piece of the puzzle for making power in a naturally aspirated car. This upgrade coupled with many of our other parts will help maximize the power in your B7-RS4.

Since the B7-RS4 crank is internally balanced the Stock or OEM Pulley is zero-balanced. Our JHM Lightweight Crank Pulley is zero balanced to a tighter specification than the OEM Pulley.

INSTALLATION NOTES:

When installing this modification on your car, it is a great time to replace your drive belt. We sell these as well here in this section. Also, it is important that you notice how tight your stock belt is prior to removal to gain access to the pulley. If you do not tighten it at least as tight as the stock belt was it will slip and squeal. Finally, note that one bolt hole has a dowel in the stock pulley and must be removed and inserted into the JHM pulley. Then it can only go on one way. Torque all bolts to 20 ft-lbs in a star pattern and we also recommend using Loctite.

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.